Many people think that Antique Mirror is a kind of glass, so it will not be too complicated to install. In fact, Antique Mirror is not equivalent to ordinary glass. Because one-way glass has the ability to conceal and observe, it determines the installation. Complexity. If you do not pay attention to the following matters when installing the glass, it will lead to the wrong installation of the glass, which will not have any effect, and may also cause serious accidents in the reverse installation. 1. Pay attention to the installation direction of Antique Glass Mirror and identify it with a label After-sales service specifications Single-sided glass manufacturers say that the glass can have the characteristics of observation and concealment, mainly because it is covered with colored lenses, so you must pay attention to the installation direction of the lenses when installing. Usually, it is generally regarded as an outdoor observation room. Therefore, during installation, it is necessary to align the front of the glass with the outside and the reverse side of the room, so as to effectively highlight the powerful function of one-way glass. If you are worried that the front and back will be reversed during installation, it is recommended that the installer can carry an easy-to-tear label and mark the direction clearly before installation. 2. Check the integrity of the glass before installation Before installing the glass, check the integrity of the glass. Only the complete glass can play its unique effect. If the glass is damaged, it may lead to loss of function. Just imagine that during the interrogation, if the suspect perceives the outdoor police training personnel through the damaged area, it is very likely that he will strengthen his guard and increase the difficulty of the interrogation. Therefore, the installer should carefully check its integrity before installation to avoid damage, water soaking and other events. Good quality glass manufacturers say that the above two points must be followed when installing one-way glass, and the integrity of one-way glass should be checked before installation to avoid unnecessary trouble caused by damage; Tear off the label and check the front and back of the glass in detail to make it clear that it is helpful for quick installation later. We are a professional Silver Mirror manufacturer with many years of production experience, you can consult us if you are interested.
