It is a layer of colored coating on the outside of the glass. It is generally difficult to remove. It is generally not recommended to remove it. After removing it, it is difficult to keep the glass transparent. It is recommended that you use acidic substances or banana water. Try blowing hot air against the lens with a hairdryer. The coating can be removed by softening the colloid. The coating is nano-level and has been firmly attached to the glass surface molecules. If you want to scrape it off, you can only use a soft grinding wheel to polish it, but the effect is not good, and it will look like frosted glass when thrown out. . What do you use to clean the glass? Dishwashing liquid and glass scraper, wipe it with a damp cloth first, and then scrape the glass with the glass, it will be very clean. How to clean glass 1. When painting the walls, the glass windows will stick to some lime water. It is difficult to remove these lime tumor marks if you use ordinary water to scrub. Therefore, wipe the glass window with a damp cloth dipped in some fine sand, and the glass can be easily cleaned. 2. Drop some kerosene on the glass, or use chalk ash and gypsum powder dipped in water to coat the glass to dry, wipe it with a clean cloth or cotton, and the glass is clean and bright. 3. Glass furniture will turn black after too long. You can wipe it with a muslin cloth dipped in toothpaste, so that the glass will become as bright as new. 4. After the fresh eggshell is washed with water, a mixed solution of protein and water can be obtained. Using it for glass cleaning will also increase the luster. 5. When there are traces or oil stains on the glass on the window, put a little kerosene or white wine on a damp cloth, wipe it gently, and the glass will soon be bright and clean. 6. The method of homemade frosted glass. Take half a basin of clean water, soak several pieces of iron abrasive cloth (the number of abrasive cloth can be determined according to the thickness of the frosted glass) in the water for a few minutes, then rub and wash the sand on the abrasive cloth, and pour out the clean water gently. Put the sand paste on the glass to be ground, take another piece of glass to be ground and press it on it, and then press it by hand to make a ring grinding. After a few minutes, two pieces of ground glass can be obtained. 7. Ceramic pieces and pebble pieces can be scratched into glass. If there is no diamond glass knife when cutting glass, you can find a broken ceramic piece, or break a pebble into pieces, use its sharp corners, use a ruler to draw marks on the glass with force, and then break the glass with force. This is because both ceramics and pebbles are harder than glass.
8. Egg white can bond glass products. If the glass product is broken, you can use egg white to coat the two sections, wipe the overflowing egg white after the seam is closed, and it will be good after half an hour. We have different Silver Mirrors for sale, you can choose according to your needs. There are Aluminum Mirror and Antique Mirror for sale, both of which are high-quality materials and are produced quickly. More Copper Free Mirror and Pattern Mirror are on sale, if you need it, you can contact us.
